Grape Hyacinths

Muscari_armeniacum2In my opinion, a drift of grape hyacinths in full bloom is one of spring’s  crowning moments. They may be small, but they pack a big visual punch. The muscari group is one of the most charming and most reliable of all of the small spring flowering bulbs. The tiny corm, planted only 3″ below the surface of the soil in the fall, will give rise to a pair of thin strappy white striped leaves, and a flowering raceme the most brilliant shade of cobalt blue.  That blue makes a spring garden worth growing.

grape hyacinths (2)From my  favorite on line horticultural reference for the Midwest, the Missouri Botanic Garden Plant Finder, I read the following:

“Muscari armeniacum, commonly called grape hyacinth, is an early spring-blooming bulbous perennial that is native to southeastern Europe (including Armenia). It features conical racemes of slightly fragrant, tightly packed, deep violet blue, urn-shaped flowers atop scapes rising to 8” tall in early spring. Each bulb produces 1-3 scapes with 20-40 flowers per scape. Each flower has a thin white line around the rim. Dense inflorescence purportedly resembles an elongated, upside-down bunch of grapes, hence the common name. Scapes rise up from somewhat floppy clumps of narrow, fleshy, basal, green leaves (to 12” long) that appear in autumn and live through the cold St. Louis winter to spring when the plants flower.”

This description tells me that Muscari will grow well in my garden, but I would like to add that they are simple to plant. All you need is some decent friable soil, and a finger to push them below ground. I have seen corms left laying on the surface send a few roots into the soil, and bloom on their sides the following spring. They are willing.

grape hyacinths (3)Grape hyacinths will come up and thrive just about anywhere you plant them.  I would avoid soggy soil that would rot the corms, and dark places fit only for ferns. They come up through a lawn without complaint. They are incredibly hardy. I have never done anything to mine, except plant and enjoy. They are persistent year after year, and can make substantial clumps. The only difficulty?  You have to buy and plant them in the fall.  Preferably in 50’s or 100’s. If you are willing and able, they will be too.

DSC_5201A new landscape project I am about to install involves the installation of a fairly large partial shade garden. My clients are very fond of blue flowering plants, and especially blue spring flowering bulbs. The rustic stone walk was finished in late October.  The coast was clear to plant bulbs, which we did fairly late in November.  It was cold, but as long as the ground is not frozen, spring flowering bulbs can be planted. Since the planting would be late, we stored the bulbs in a cool place, so they would not suffer from being out of the ground so long. Muscari cultivars seldom grow talled than 8″, so planting them near the walk made sense.

DSC_5204We planted a variety of muscari cultivars, all the the blue and white range. We planted the tried and true muscari armeniacum, and  Blue Magic, Atlantic muscari, Magical Mixture, and superstar. Lots of cobalt blue, light blue, with a smattering of white. We also planted several types of camassia, and chionodoxa forbesii Blue Giant, to extend the blue spring bloom period. Later yet, there will be some smaller growing alliums.  These muscari blooming make a quite a statement, even though they are blooming in an ocean of bare dirt.

DSC_5199The planting of this woodland garden got a head start last fall.  The locations of these bulbs will direct the height and bloom season of what I plant with them. We will plant sweet woodriff and European ginger. Were the soil not so sandy, I would plant forget me nots. I will plant more Virginia bluebells to the patch that is existing, Jack in the pulpit, Dutchman’s britches, anemone sylvestris, campanula porscharskyana, lamium white nancy, and so on.

DSC_5197We also have planned for a few Venus dogwoods in the sunniest places, a few witch hazel, and a few Canadian hemlocks. Blue leaved hostas, big and small. If we plant any astilbe, it will be a loose and airy growing version. A stand of goatsbeard is a good choice for the back of the shady border. Like snakeroot,  they take some time to establish and grow – but they are well worth the trouble.

DSC_5196Right now, this is a garden of possibilities.  What a pleasure to be at that point, in early spring. If you are planning a garden in our zone right now, check out the Missouri Botanic Gardens opinion about your choices. And leave some spaces and places for grape hyacinths.

the Plant Finder

Galvanized

the branch studio fountain 2016Every winter, the Branch Studio fabricates a new fountain or two. Some years that fountain is classical in form. Classical garden fountain style interpreted in steel interests me, and our clients. Our fountains come ready to fill, plug in, and turn on. There is something about water in the garden that enchants, so I like to make it easy as possible to have. Some years our winter fabricated fountain is contemporary. We have in the past fabricated an elliptical and rectangular steel fountain with a congested steel rod surface. The rectangular fountain has over a mile of steel rods welded to its exterior, and weighs close to 4000 pounds. Have you seen it?  The elliptical fountain has been placed in a private garden. In the interest of fabricating a one of a kind fountain, our newest contemporary fountain is a shape we have never done before.
The Branch Studio fountain 2016 (3)This winter, our contemporary fountain from Branch is spherical, and features our signature stick like and prickly surface. A pair of steel hemispheres, 64 inches in diameter,  got welded together. We sliced the top third off that welded hollow sphere.  The remaining 2/3rds of a sphere became the armature for this fountain. Owen and Riley, with followup from Sal, spent a good bit of the winter welding sticks of all different sizes to the surface. Our group of companies, Deborah Silver and Company, who designs and installs landscapes, Detroit Garden Works, who retails just about everything beautiful and useful for a garden and landscape, and The Branch Studio, who fabricates whatever garden ornament a gardener or landscape designer might dream up for a project –  hope to help every gardener and landscape designer get where they want to be with their landscape. But in the dead of the winter, we just express ourselves, and keep our fingers crossed there will be a client who hears what we have to say.

The Branch Studio fountain 2016 (1)Branch created this fountain for the garden strictly on speculation. Why would I speculate?  All of the Branch fabricators, and the studio head, Buck, are very creative people. They need a project once in a while that allows them to stretch their wings, and fabricate something new. This is a breath of fresh air for our group. It creates excitement in the studio. And is is good for a client seeking a very unusual and one of a kind ornament for the garden.

The Branch Studio fountain 2016 (2)The Branch group handled the fabrication of this fountain like they were born to make it. Once the stick making had covered the surface, a decision was made to leave the 6″ wide return plain. The contrast of one complex surface to the other plain one is striking and pleasing. The fountain jet will be fabricated next. The jet pipe will mimic the spherical shape and construction of the fountain. Water from the jet pipe splashing over a rod steel covered sphere will be quite musical.  The sound of a fountain is a considerable part of its attraction.

20160419_124028 (2)Clients considering the purchase of Branch containers are concerned about the longevity, and the durability of their resistance to rust, and rightfully so. Everything we manufacture is meticulously hand fabricated with heavy gauge hot rolled steel, with a lifetime of service in mind. The cost of them reflects this. What we do to prevent rust is considerable. All of our containers, fountains, and garden ornament are sent out for galvanizing after it is fabricated. Our galvanizing company has a zinc tank  6 feet wide, 8 feet deep, and forty feet long. This shape has everything to do with the fact that most steel that comes here for galvanizing are steel beams using in the construction of building, bridges, and so on. The plant manager was dubious the day we arrived with our first load of garden containers. 13 years later they know we are as serious about rust prevention as we are about beauty. We pay for galvanizing by the pound.  Our scale at Branch only weighs objects up to 2000 pounds.  This fountain went over the 2000 pound mark.  We won’t know what it weighs until after the galvanizing is complete. The fountain is lifted with a bridge crane via steel straps in preparation for the dip.

20160419_124120This tank holds 824,000 pounds of molten zinc, heated to about 900 degrees. The galvanization process completely immerses the raw steel object in molten zinc, very slowly.  The shock of the heat to the steel is considerable.  Steel which is not thick enough can be damaged by the plating process. The molten zinc coats every surface with a skin of zinc. How much of a skin?  This fountain will weigh 20% more once it is galvanized. This means that a 3000 pound object will emerge with 500 pounds of zinc coating its surface.The fountain was lowered into the tank ever so slowly.

20160419_124757 The shop foreman made a trip up to Branch to inspect what we had a mind to galvanize, before we took the fountain to them. An object of this size and complexity is a once a year project for us. There are logistical issues that need to be addressed in advance. There was plenty of discussion about what it would take to get the fountain to sink slowly and evenly. An object that floats on top of the molten zinc is a problem object. Our big spherical fountain had lots of holes drilled in it, which will be repaired with galvanized steel discs once the galvanizing process is complete. Our garden boxes have loose galvanized plate steel bottoms which are added after the boxes are galvanized. A box with no bottom sinks in the zinc bath.

20160419_124729The fountain took as long to emerge as it did to descend.

20160419_124500A molten zinc tank always has floating hardened zinc and impurities floating on the surface.  Prior to and during the galvanizing of this fountain, the surface of the molten zinc got raked, so those impurities would not be deposited on the surface. Occasionally a glob of something will stick to an object.  If it is chipped off, or ground down too hard, the integrity of the galvanizing might be breached.

20160419_124541If a galvanized object from us develops a small rust spot, it will do so within 2 weeks of being outdoors. That spot can be repaired with cold galvanizing compound. A breach in the galvanizing is a rare occurrence.

20160419_124549The moment any steel object emerges from a zinc bath sports a shiny as silver color. Once that object comes in contact with the air, that shiny surface begins to oxidize, and will become that dull gray color one usually associates with galvanized metal.

20160419_124649The process by which Branch fabricates, finishes, and sells their garden pots, fountains, pergolas and ornament is all about beautiful design and fabrication, and a thoughtful and serious finish that is unlikely to need any maintenance. My thanks to the plant manager for taking these pictures for me.

spherical Branch fountain (2)Back at Branch, the fountain is awaiting our final signature finish, which will give the steel that blue gray patina which is reminiscent of lead. Heather, who handles all of the Branch Studio inquiries, came with me for a look see today.

spherical Branch fountain (1)I am sure this fountain will be up and running soon.

The New Berger Picard In The Neighborhood

Bergere Picard namedGary (4)Last November Rob drove to Roanoke Virginia to meet and pick up his intended-an 8 week old Berger Picard puppy.  Berger Picard? Berger means shepherd in French; Picard refers to the Picardy region in France. One of the oldest of all the French herding dogs, the Berger Picard was almost driven to extinction by the devastation of two world wars. The Picardy region in France was especially hard hit.

Bergere Picard namedGary (10)Devoted breeders, and the shepherds that needed their herding skills to tend their flocks kept the breed alive. They were virtually unknown in the United States until 2005. The film “Because of Winn Dixie” introduced this rare, rough and ready breed to Americans.  From the Berger Picard Club of America, ” The 2005 release of the movie Because of Winn Dixie introduced America to the Picardy Shepherd. The movie producers wanted a dog that looked like a mixed breed, but needed several that looked alike so that production could continue smoothly, thus they decided on this rare purebred dog. It is this breed’s rustic tousled appearance that has fooled many people into thinking “Winn-Dixie” is just a mutt.” Just a week after his arrival, Milo was invading his crate space, and Gary was at home enough to scold him about it.

November 20 2015 060The Berger Picard is still a very rare breed.  There are reputed to be no more than 3500 of them, world wide. So how did Rob become acquainted?  In July of 2015, the breed was admitted to the AKC. A regional dog show in our area featured a specialty meeting of a Berger Picard club that was graced by 14 of these dogs – all together, in one place. He was smitten.  Some months later, the President of the Berger Picard Club of America had pups on the way; Rob spoke for one of them.  Gary had not so much to do or say for his first few days, except to stick close to Rob.  By day three, he was starting to feel at home.

Bergere Picard namedGary (15)The breed is known for its giant ears, big feet, and energetic personality. They are herders, so they need regular exercise. But Gray would need to develop some people skills, as he would be coming to work every day. In his favor is an innate sense of humor. Not all dogs make good retail store dogs. My corgi Milo is an exception. He is too little and low to the ground to be a threat to anyone, and he is eminently sociable. He doesn’t jump on anyone. He has Welsh style manners, except for his enthusiastic barking when he is playing ball. We have people come to the shop all the time-just to check in on Milo. I like that.

Bergere Picard namedGary (8)Gary grew by leaps and bounds over the winter. The corgis were outraged by the Berger Picard puppy invasion, but eventually they all made friends. That is a tribute to his easy going nature, as the corgis are 11 now, and have their routines. Rob’s efforts to expose him to other people and dogs meant regular trips to the dog park, puppy obedience school, and introductions to people who come to the shop.

Bergere Picard namedGary (3)By late winter, you could watch him putting on weight and stature. It seemed like he went from 14 pounds to 50 overnight.  That shaggy coat that is typical of the Bergers was beginning to come in – face first. He is intensely attached to Rob, and he has taken many of his behavioral cues from Rob, which is a good thing.

February 27 2016 003The day he met MCat, I made an effort to stay out of the mix. There was no need to interfere with their introduction. There was a lengthy stare down. Then, a truce. If you have never seen MCat, you are not alone. He spends the middle of his day snoozing in the pot of his choice. Early and late, he is an active member of the group.

Bergere Picard namedGary (6)It has been fun watching these two fall for each other.

April 7 2016 031Both Corgis have been energized by the addition of a third dog.  They do not seem to be in the least bit intimidated by his size. His good and graceful with my 11 year olds. In the morning before the shop opens, they all play ball-even Howard.

April 12, 2016 123So why am I talking about Gary? He is a new member of our group. Gardeners coming in now after the winter hiatus want to meet him, and have questions about the breed. Should you come by, we will be happy to introduce you.

DSC_4528 Despite being only 7 months old, he has his quiet moments. This is a good thing. The 3 large orange caution cones positioned at our entrance right now is part of his training to never breach those open gates, and leave the yard. He seems to be catching on to that idea fast.

Bergere Picard namedGary (7) He has a warm and affectionate personality that matches his size.

April 12, 2016 058I don’t know how much longer Rob will be able to pick him up like this – ha. It is impossible to tell which one of them likes this relationship better.

Berger-PicardThey make very handsome grown-ups, don’t they?

A New Gravel Driveway

landscape under construction (8)I admire people who buy old homes, and sign up for all that it will take to renovate them. That is a huge commitment in every regard. An undertaking such as this demands lots of time and even more patience. I cannot imagine the expense. This gorgeous English Tudor style home is 95 years old. Very old homes like this one are remarkably sturdy and well built. I own a house built in 1930, and I can attest to how rock solid it is. I can barely drill a hole in my steel mesh reinforced plaster to hang a picture. That plaster and brick set over concrete block walls means that my house is incredibly quiet and structurally sound. This home features a virtually indestructible brick fired from a clay body featuring a big mineral content – manufactured with the idea of longevity and service in mind.  A good bit of the trim is hand carved limestone, all of which is excellent condition. The new roof is slate; slate roofs last just about forever. But great age exacts a toll on the working parts of an old house. Every house is a small city. It needs electricity, heat, air conditioning, weather tight windows, plumbing – this is a short and not comprehensive list. What got updated here is just about everything, and took a year and a half to accomplish. A kitchen and bathrooms that worked well in 1920 were reworked from the ground up. The interior renovation of this house is finished, and is finished beautifully.

My client’s interior designers introduced me to them and their property.  Eventually they would turn their efforts towards the landscape. Last year’s landscape efforts were concentrated on a pool, terracing, a spa, and an astonishing pergola built and installed by the Branch Studio. Screening trees, and a large collection of small spring flowering bulbs got planted late in the fall. This year, we hope to plant the front, side, and rear yard landscape. The property had been neglected for decades. The gravel driveway, all but invisible under a thatch of compost and weeds, was lined in concrete curbing that went 24 inches below grade.  A number of trees grew up, and spent decades thriving. Many of those trees were now were in serious decline.  Disease and fierce weather had taken their toll. The roots had grown over the curb, reducing the width of the drive to just over 8 feet.  A new driveway design and installation would need be the first part of the installation of the landscape.

Once the front yard landscape was agreed upon, there was a lot of work to do. Once the dying and diseased trees came down, the stumps were loaded into a 30 yard dumpster – almost 12 tons worth. That is a staggering number, and it explains why so many large machines are parked in the front yard. Taking apart an old landscape and driveway is a shocking experience, but bare dirt that is asking to be regraded is a big breath of fresh air. It is never an easy thing to abandon what was, and go on.

a new driveway (12)Once the drive curbs and the trees were removed, the ground had to be graded.  In this case, there was quite a bit of what I call balancing to do.  The land which was high on one side was lowered, and the low side needed to come up.  From the street, the land would look balanced, left to right.

a new driveway (4)The grade of the driveway would determine the final grade of all of the land surrounding it. A large motor court some 56′ feet wide by 32′ deep would be a dominant feature of the landscape. This would permit off street parking for clients who entertain regularly. But most importantly, a gravel drive and motor court seems appropriate for a house of this age and architecture. It interests me that many very old homes with motor courts were built before the advent of motor traffic. It can be a beautiful feature in and of itself. The accompanying landscape would in a simple way feature the house and gravel court.

a new driveway (2)In many respects a gravel drive is simpler and somewhat less expensive to install than concrete, asphalt, or stone.  One of the biggest expenses is the cost of the edging. The gravel must be contained.  A hard boundary is what keeps the gravel in place.  Gravel that has crept away from its intended location can look great in a very informal setting. It would look messy and untended in a house of this architectural formality.

a new driveway (3)
Both the drive and motor court are edged in 1/4″ thick steel.  That steel edges is secured by steel stakes that are driven into the ground through steel loops welded to the back of the edging. The steel has to be this thick to withstand repeated vehicular traffic, and stay in place.

a new driveway (6)The gravel motor court will be bordered in concrete paver brick, three bricks deep.  The border will help to visually reduce the size of the gravel area. It will also recall the brick on the house. This brick will be dry laid between parallel bands of steel edging.  Concrete brick can better withstand compression weight of a vehicle. Pictured above is a base layer of compacted road gravel.  The finished crushed stone will be added at the very last, at the height you see indicated by the top of the steel edging.
a new driveway (5)A large new blue stone front walk will make beautifully clear the location of the front door. The house is not symmetrical in its footprint.  The walk which is large enough to feel like a terrace is a centering gesture. There is plenty of room for containers out away from the front door. This exterior entry way echoes the scale of the spacious foyer just inside.

a new driveway (9)An important element of designing any driveway is to check if it is driveable.  My clients drove it a number of times when the scheme was painted on the ground. One little but significant change was made to help anyone backing down the drive stay in the lane. A driveway that doesn’t work well always shows where that pinch point is. Curves and changes of direction need to be gradual and sweeping.

gravel drivewayThe drive at the back will be installed as concrete aggregate, rather than compacted gravel. This will make it easy to shovel a path from the detached garage to the back door. The forms are being set for this portion of the drive. An iron fence and gate appropriate to the architecture is to come soon.

a new gravel driveway (3)The bed lines near the gate to the back yard were specifically set to allow my clients to back out of the garage, and turn around.

a new gravel driveway (2)As of late yesterday, the finish gravel has been put down in the motor court. The concrete brick is due to come in today.

a new gravel driveway (1)At the last of the day, a pair of 25 foot multitrunked katsura trees were added to frame the view of the house from the road. The landscape will be underway shortly.